Crew coating an asphalt shingle roof on a commercial building
Shingle Roof Coating

Jeffersontown Shingle Roof Coating

We apply shingle roof coating on Jeffersontown strip centers, offices, and churches only where the shingles still lie flat, hold their granules, and the maker approves it.

Best OnFlat shingles with granules
First StepShingle maker guidance
PrepLoose tabs fastened, nails sealed
SystemOften one silicone pass
Shingle Gate

Can These Shingles Be Coated?

Coating works on a narrow set of shingle roofs. This is the gate every shingle roof goes through.

What We CheckCan Be CoatedNeeds Replacement
Shingle shapeTabs lie flatCurling, cupping, or lifted tabs
GranulesMost granules still onBare spots or gutters full of granules
Water sheddingRoof still sheds waterActive leaks across the field
Maker approvalCoating maker approves shinglesProduct lacks approval for shingles
FlashingWall and vent flashing intactRusted or loose flashing throughout
Shingle Details

Where Commercial Shingle Roofs Wear Out

These are the five places we check on a shingle roof before any coating talk.

Tab Edges

Tabs that curl or lift let wind-driven rain under the shingle above. A few loose tabs get fastened down, and widespread curling means the roof needs replacing.

Granule Loss

Granules shield the asphalt from sun. Piles at the downspouts and bare, shiny patches show the shingles are wearing through and have lost their base for a coating.

Vent Pipes And Walls

Flashing at plumbing vents and walls on church and office roofs dries out and pulls away. It gets resealed or replaced before any coating.

Mansards And Canopies

Shingle mansards on strip centers and small entry canopies face the street and the afternoon sun. Their exposed nail heads get sealed, and color matters because shoppers see them.

Ridge And Valleys

Ridge caps crack and valleys carry the most water. Both get a close look, since a coating will not fix a valley that is already leaking.

Coating Choices

Commercial Roof Coating Options for Jeffersontown

A shingle roof that passes the gate still has more than one path. Here is how they compare.

Facility manager and roofer talking through a roof plan

Silicone Shingle Coating

Many shingle coatings are silicone-based and go on in one pass after cleaning, fastening, and nail sealing.

Get a ballpark price
Exterior of a multi-tenant commercial building

Coating The Mansard Only

On a strip center, the shingle mansard can be coated while a metal or flat main roof gets its own system.

Metal roof coating
Why Coat Shingles

Benefits of Coating Your Roof

On shingles that qualify, a coating buys time. These benefits apply only after the gate.

More Years From Shingles That Lie Flat

Sealing shingles that still lie flat and hold granules adds a protective layer without stripping the roof, so the building puts off a tear-off.

  • Loose tabs fastened down first
  • Nail heads and flashing sealed
  • Maker approval checked up front

Quieter For Occupied Buildings

Coating is quieter and shorter than a tear-off, which matters for churches and offices with weekday schedules.

Lighter Color Choices

A light gray coating reflects more sun than dark asphalt, and draws less attention than bright white on a street-facing roof.

Less Landfill Waste

Old shingles stay on the roof instead of going to a landfill.

Shingles Curling Or Shedding Granules?

Call us before you price a coating. We will tell you honestly whether the shingles can take one.

Call Us
Order Of Work

How A Shingle Roof Gets Coated

Shingle coating is mostly preparation, then one careful pass.

Roofer inspecting fasteners and panel laps on a commercial metal roofRoofer walking a commercial metal roof during a roof inspection
  1. WALK

    Inspect Your Roof

    We check tabs, granules, valleys, and flashing, look for leaks inside, and confirm the shingle and coating makers allow the system.

  2. CLEAN

    Gentle Cleaning

    The roof is cleaned without blasting granules off, and debris is cleared from valleys and gutters.

  3. FIX

    Fasten And Seal

    Loose tabs are fastened, exposed nail heads sealed, and flashing at walls and vent pipes repaired.

  4. PLAN

    Pick The Color

    Color is chosen with the building's look and any city zoning step in mind, often a light gray on street-facing roofs.

  5. COAT

    Apply The Coating

    The coating goes on, often in one pass, at the maker's rate, with extra attention at valleys and ridges.

Related Services

Coatings For The Rest Of The Building

Shingle sections often sit beside metal or flat roofs. These services cover those areas.

Questions

Shingle Roof Coating Questions

Answers about the shingle gate, church roofs, and coverage questions.

Can a shingle roof on a commercial building be coated?

Some can. Coating works on asphalt shingles that lie flat, hold most of their granules, and still shed water, with the coating maker approving its system. Curling shingles, missing tabs, or gutters full of granules mean replacement instead. Prep covers cleaning, fastening loose tabs, sealing exposed nail heads, and checking flashing at walls and vent pipes.

How much granule loss is too much for coating?

If you can see the black asphalt mat in patches, or the downspouts dump handfuls of granules after rain, the shingles have worn past the point a coating helps. A few thin spots on an otherwise covered roof can be coated. We check by sight and by rubbing a test area.

Will a coating change how a church roof looks?

Yes. A coating smooths the shingle texture and changes the color, which shows on a sloped roof facing the street. We bring color samples, and light grays and tans tend to blend in better than bright white. Ask your congregation or board about the look before the job is scheduled.

Can a church or office with a shingle roof in Douglass Hills be coated?

Some can, when the shingles lie flat, keep most granules, and the coating maker approves its system for asphalt shingles. Churches and small offices with sloped shingle roofs raise this most in Douglass Hills. Coating changes color and texture, so the city's zoning step applies, and light gray draws less attention than bright white.

Does coating affect the shingle maker's coverage?

It can. Ask the shingle manufacturer how a coating affects any existing coverage before work starts, and get the answer in writing. We make no promises about another company's coverage, so that question stays between you and the shingle maker.

Who approves shingle roof coating in Jeffersontown?

Inside city limits, start with the City of Jeffersontown's permitting department and ask whether coating needs a permit at your address. Outside the city, the first step changes with the location: a home-rule city like Douglass Hills has its own city hall, while a Louisville Metro neighborhood like Fern Creek goes straight to Metro.

Shingle Roof Estimate

Find Out If Your Shingles Can Be Coated

Enter the roof size for a ballpark range, or call to have the shingles checked first.

Call Us(502) 293-5577