We handle metal roof coating for Hurstbourne Parkway office buildings: canopies, screen walls, and mansards, plus the roofs behind them, planned around office hours.
Office buildings along Hurstbourne Parkway often pair a low-slope main roof with metal accents: entry canopies, rooftop equipment screen walls, and mansard panels. Those accents are the first thing visitors see, and they wear in their own ways.
Canopy roofs collect leaves and hold water at the back edge, which points to silicone. Screen walls rust where they meet the roof, and mansards show rust at cut edges and screw heads first.
Office roofs on the Parkway carry more small metal parts than most. These five need the most attention.
Leaves and grit collect where a canopy meets the wall, and water sits there after every rain. The wall joint gets resealed and silicone goes over the panels.
Equipment screen walls rust at the base, where they sit in the water running across the main roof. That base is brushed, primed, and sealed before coating.
Cut edges and screw heads on mansard panels rust first. They are treated panel by panel, then coated in a color chosen with the building's look in mind.
The low-slope roof behind the accents drains to scuppers and interior drains. Debris is cleared and the area around each drain checked before any coating goes down.
Entries, walks, and parking sit right under canopies. Masking, overspray screens, and weekend timing keep visitors and staff clear of the coating work.
On an office building, a coating protects the parts people see and the roof behind them.
Rusted canopies and mansards make a building look tired from the Parkway. Coating them after rust prep restores an even finish without replacing the metal, and the main roof behind can be coated in the same visit.
Masking and coating at busy entrances happen on weekends, when few people are coming and going.
Silicone over a canopy that holds water keeps the back edge sealed through wet spells.
Coating the existing panels avoids pulling and hauling away canopy and mansard metal.
Office properties here mix roof types, so most jobs use more than one of these.
Canopy roofs and low areas that hold water get silicone over cleaned, sealed panels.
Silicone roof coating
Mansard panels and screen walls get rust prep, screw work, and a coating in a matching color.
Metal roof coating
Pitched metal accents that drain fast take acrylic, which recoats easily later.
Acrylic roof coatingCall us and tell us which entrance and how long water sits after rain. We will check the canopy and the wall joint behind it.
Office work is organized around visitors, staff, and parking.
We look at canopies, screen walls, mansards, and the main roof together, and note entrances, walkways, and parking that sit under the work.
Hurstbourne's Letter of Compliance and permit questions are settled before any roof work date is set.
Doors, walks, glass, and nearby cars are masked or moved before coating starts, usually on a weekend.
Canopies, screen wall bases, and mansards are coated, and the products and colors go in the roof file for later touch-ups.
These are the other towns where we take commercial roof coating work. If your building is somewhere else, call us or send us a message.
Shelbyville Road storefronts coated around store hours.
Shingle and metal slopes on churches and offices.
Flat main roofs paired with metal mansards.
Metro small commercial jobs near Jeffersontown.
Answers about city forms, canopies, and office scheduling in Hurstbourne.
Hurstbourne publishes its own Letter of Compliance form and a city building permit form, so check with the city before any roof work starts. Ask whether the letter goes on to Louisville Metro for the building permit or whether the city permit covers the job, and keep a signed copy in the roof file for later recoats.
A simple roof plan marked with the rooftop units, skylight panels, canopies, and the staging area answers most questions. Add the property address and the contractor names the city form asks for. The same plan helps tenants and building staff see where work happens each day.
They get the same rust prep and screw work as a full metal roof. Canopies over entries hold water at the back edge, which favors silicone; screen walls rust where they meet the roof; mansards rust at cut edges and screw heads. Busy entries mean masking doors and walks, so weekend work fits best.
Silicone keeps its hold under water that sits for a day or two, while acrylic breaks down under ponding. Canopy roofs are small and often pitched back toward the wall, so the back edge stays wet. Silicone there, with the wall joint resealed first, handles that wet strip.
Yes. The work is on the roof and the canopies, and offices stay open. Entry canopies are the exception, since masking and coating them blocks a door for a while, so we do those on weekends or after hours by arrangement with the property manager.
Intakes near the spray area are shut down or covered while coating goes on, then reopened once the coating has set. We map every intake during the roof walk and give the property manager the times, so building staff can plan around stuffy afternoons.
Enter the roof size for a ballpark range, or call to have the canopies and mansards looked at.
Leave a name and number and we will call you back about your commercial roof.
Or call us now: (502) 293-5577